Quick Answer: What Do You Apply Mod Podge With?

Can you Mod Podge glossy photos?

Apply 2 to 3 coats of regular Mod Podge.

If you need to, let the second coat dry, then add a third.

You can use Mod Podge in a different finish for this step, such as glossy or satin.

Applying Mod Podge over photo paper is not recommended because of how thick it i and how sensitive it is to moisture..

How do you make homemade Mod Podge?

To make a jar of fake / homemade Mod Podge you need 1 cup of glue and 1/3 cup of water. These proportions are perfect – don’t mess with them. Other internet recipes for homemade Mod Podge abound but they are TOO WEAK.

How do you apply Modge podge smoothly?

When applying Mod Podge over a design, apply one layer of the Mod Podge with side-to-side brush strokes. Allow that coat to dry for 20 minutes or so before applying another even layer of Mod Podge in up-and-down strokes. I have found that this process results in the smoothest possible finished surface.

What is the best brush to use to apply Mod Podge?

Taklon bristle brushMod Podge Topcoats are best brushed onto a project surface using a soft, Taklon bristle brush which will help eliminate brush stroke marks . Clear Chalkboard Topcoat enables you to turn any paper decoupaged surface or any painted surface into a chalkboard surface .

How many layers of Mod Podge should I use?

You can use two or more coats depending on the type of affect you are trying to achieve. If you want a soft smooth surface with no ridges, apply at least 5 to 6 coats.

How long does it take for Modge Podge to dry?

What is cure time for Mod Podge (how long should I let it dry)? It feels dry within an hour, but I wouldn’t hang up a project or use it until it’s been dry for 24 hours. For Hard Coat, the recommended dry time is 72 hours.

Why does my Mod Podge look streaky?

Causes of Streaking in Decoupage Finish Applying glue over almost dry glue. This pulls the dry glue away from the surface and creates streaks. In the future, let wet glue dry even if it means skipping an area.

What can you put Mod Podge on?

Almost any surface can be used to create a decoupage project. Suitable surfaces include wood, papier mache, terra cotta, tin, cardboard and glass. Only SOME plastics are okay for decoupage – I recommend testing a small area before completing your entire project to make sure that the Mod Podge will adhere.

How do you use Modge podge without streaks?

2 Answers. When applying the Mod Podge, use a soft, wide brush and as few brush strokes as possible, as it begins to set quickly. If you can brush it on with only one or two strokes, that is best. Use very thin coats.

Can you Mod Podge actual photos?

Well, Mod Podge has the answer! Transferring a photo onto just about any surface such as wood, metal, glass, terra cotta and even fabric is so easy to do using Mod Podge Photo Transfer Medium! Take a look at the photo below, it was transferred onto an inexpensive wood plaque and now is preserved for years to come!

Why did my Mod Podge dry white?

You applied the Podge too thickly. This is a common problem I see when readers email me images of Mod Podge that is still white. Usually there’s clumping. Mod Podge is best applied with several thin layers, with dry time in between each layer.

How long does Mod Podge take to dry on canvas?

15 – 20 minutesPut a medium layer of Mod Podge on the canvas, smooth your shape down and then let it dry for 15 – 20 minutes.