Quick Answer: What Is Thompson’S Water Seal Used For?

Can you apply Thompson’s Water Seal with a roller?

Even if you don’t want to buy a garden sprayer, you can still use plenty of other tools.

Paint rollers, paint pads, and brushes should still work just fine when you apply Thompson’s water seal..

Should I use Thompson Water Seal on pressure treated wood?

However, most pressure-treated wood should have periodic sealing against moisture, preferably every year or so. … The directions for some, such as Thompson’s Water Seal, specify pressure-treated wood as a suitable use.

What temperature do you apply Thompson’s Water Seal?

Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application. Do not apply product if rain is forecasted within 24 hours of application. Perform the splash test. Sprinkle water on various sections of surface to be sealed.

Is Thompson’s Water Seal breathable?

The RSLTWSU5L Thompson’s One Coat Water Seal Ultra protects against water damage in one coat. … The breathable waterproofing membrane allows moisture vapour inside the substrate to evaporate whilst protecting against water penetration and damage.

What is the best way to apply deck sealer?

Apply the deck sealer with a natural bristle brush. A roller is faster, but brushing helps force the sealer into open pores and grain. Make sure to get the sealer into joints where two boards butt together. Apply the deck sealer to three or four boards at once, working their entire length.

How long does Thompson’s Water Seal last?

10 yearsIf applied correctly, Water Seal will last up to 10 years.

What does Thompson Water Seal do?

Thompson’s® WaterSeal® Penetrating Timber Oil is an oil-based product that provides protection by penetrating into wood pores and sealing out water infiltration. Thompson’s® WaterSeal® Waterproofing Stains are water-based products that have film-forming properties to protect the wood by repelling water.

How often should you use Thompson Water Seal?

one to three yearsThompson’s WaterSeal includes a complete line of deck sealers and stains for protecting deck wood from moisture and sunlight. Applying a sealer and/or stain typically is recommended every one to three years, depending on the finishing product, deck use, weather conditions, and sun exposure.

Is Thompsons Water Seal any good?

Thompson’s WaterSeal has clearly not been a consumer favorite with deck sealers. Mainly as it does not offer any UV protection and it grays in a few months. … Thompson’s® WaterSeal® Waterproofer Plus Clear Wood Protector is designed for all exterior wood and decking surfaces.

What happens if it rains after applying Thompson’s Water Seal?

Rain will damage the finish of any wet sealer with linseed oil or mineral oil in it. Because it forms a coating, it takes several hours to “set up” (dry) and during that time the sealer is vulnerable.

How long does Thompson Water Seal need to dry before rain?

24 hoursAlso to know is, how long does Thompson Water Seal need to dry before rain? The forecast should indicate no rain for at least 24 hours after application. The deck surface should be allowed to dry for at least 48 hours before application.

Does Thompson Water Seal kill grass?

This Thompson’s cleaner is a gentler, biodegradable formula so we didn’t have to worry about it harming the grass or trees nearby when it was washed off.

Is it better to seal or stain a deck?

Many deck companies recommend using a combination stain/sealer product, which is basically a sealer with pigment added. The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

What is the best way to apply Thompson’s Water Seal?

Surfaces must be thoroughly cleaned prior to application with a deck cleaner (like those in the Thompson’s® WaterSeal® cleaner line) applied according to label directions and cautions. If surface is damp or wet from cleaning or weather, allow the surface to dry thoroughly (a minimum of 48 hours) before application.

Is Thompsons Water Seal good?

Thompsons WaterSeal Advanced Natural Wood Protector – Editor’s Choice and The Best Outdoor Sealer for Wood. Thompson’s WaterSeal Advanced is a maximum strength waterproofer and natural wood protector. The coating resists mildew growth, UV damage, and fading. It’s perfect for natural wood decks, fences, and furniture.

How many coats does Thompson’s Water Seal have?

Thompson’s WaterSeal Waterproofing Stains. Application: Only one coat is recommended for both Semi –Transparent & Solid. A second coat can be added if more color is desired. Allow the first coat to dry (approximately 2 hours) before second application.